)
)
)
)
)
)
 |
 prototype 1996 |
 prototype 2001 |
The PM250 system in its current configuration is the result of an in-depth development program which, step by step, has updated all the major functions of the equipment concerning its material and software aspects.
Main characteristics of the equipment :
- Manufacturing volume made up with a cylinder of 250 mm in diameter and a height of 300 mm.
- The standard Materials used are metallic and ceramic powders which can be found on the powder metallurgy market.
Metal : Stainless Steels, Tool Steels, Non ferrous alloys, Super alloys...
Ceramic : Alumina... - The technology of the laser source integrated into the equipment is from the latest fiber laser generation
- Control software : PHENIX CONTROL
- Computer-aided design software programme : PHENIX PROCESSING
Common characteristics of metallic parts :
- Repeatability : x= 20µm ; y= 20µm; z= 20µm
- Level of detail > 100µm
- Post-processing : sand blasting and/or polishing
Common characteristics of ceramic parts :
- Repeatability : x= 20µm ; y= 20µm; z= 20µm
- Level of detail > 300 µm
- Post-processing : post-sintering in the furnace
- Mechanical characteristics obtained during post-sintering
PHENIX SYSTEMS
Parc Européen d'Entreprises - Rue Richard Wagner - 63200 Riom
Tél. 33 (0) 4 73 33 45 85
Fax. 33 (0) 4 73 33 45 86
Parc Européen d'Entreprises - Rue Richard Wagner - 63200 Riom
Tél. 33 (0) 4 73 33 45 85
Fax. 33 (0) 4 73 33 45 86