)
)
)
)
)
)
The PM100
system is the first laser sintering equipment adapted for the
industrialists who mainly manufacture small parts; It is also a tool which
is highly geared
towards research and development, and also training, as it provides all the
resources of the process at the least possible cost.
Main characteristics of the equipment :
- Manufacturing volume made up with a cylinder of 100 mm in diameter and a height of 100 mm.
- The standard Materials used are metallic and ceramic powders which can be found on the powder metallurgy market.
Metal : Stainless Steels, Tool Steels, Non ferrous alloys, Super alloys ...
Ceramic : Alumina... - The technology of the laser source integrated into the equipment is from the latest fiber laser generation.
- Control software : PHENIX CONTROL
- Computer-aided design software programme : PHENIX PROCESSING
Common characteristics of metallic parts :
- Repeatability : x= 20µm ; y= 20µm; z= 20µm
- Level of detail > 100µm
- Post-processing : sand blasting and/or polishing
Common characteristics of ceramic parts :
- Repeatability : x= 20µm ; y= 20µm; z= 20µm
- Level of detail > 300 µm
- Post-processing : post-sintering in the furnace
- Mechanical characteristics obtained during post-sintering
PHENIX SYSTEMS
Parc Européen d'Entreprises - rue Richard Wagner 63200 Riom
Tél. 33 (0) 4 73 33 45 85
Fax. 33 (0) 4 73 33 45 86
Parc Européen d'Entreprises - rue Richard Wagner 63200 Riom
Tél. 33 (0) 4 73 33 45 85
Fax. 33 (0) 4 73 33 45 86